Fullde 6KW 220VAC Rack Mounted Dummy Load Bank for Data Center
|Load Step||500W,500W,1KW,1KW,1KW,2KW；in total 6 steps, 6KW|
|Resistor Element||Special alloy resistance, resistance tolerance is±5%|
|Power Supply||220V / 50HZ|
|Control Function||Monitor current and voltage parameters of test circuit|
|Protection||Over-temperature alarm: The outlet temperature exceeds the rated
temperature value, automatic unloading and alarm|
|Color||The metal shell adopts uniform spraying, the regular color of
cabinet is black, or customized according to the requirements|
|Insulation grade||F, with the grounding bolt below the housing|
|Service life||Continuous online work, 7*24 working system, service life is not
less than 10 years|
- The box adopts cold rolled steel plate (cold rolled steel plate
thickness 1.5mm), punching, bending, welding, surface phosphating,
electrostatic spraying, moisture-proof, anti oxidation, smoke
corrosion, spraying color: black.
- The front ear of the box body is provided with screw holes and
hooks, which can be locked by screws or hung on the square holes of
the cabinet by the hook, so that the utility model is convenient to
Resistance Wire Material: Nickel chromium alloy
Internal: High temperature Magnesium Oxide
External Heat Pipe: 304 stainless steel
Manufacture Craft Standard
1. Control wire cross-sectional area should not be less than 1.5mm2. The rest of the wire was designed by the 4 A/mm2.
2. Cree page distance was designed not less than 20 mm/KV by
3. All number tube print clearly. All wiring shall be laid in the
groove, and all wiring head shall be protected;
4. The thickness of cold rolled steel sheet is 1.5 mm.
Anti-corrosion technology : pickling, photphating spray. The
surface is smooth and must not have dents or scratches;
5. All components are marked with code number and correspond to the
circuit principle diagram.